drywall tiny house

Last night as the moon rose over the pines we finished pulling wire throughout the little house. Unfortunately that means no pictures on todays post as it was too dark to take one. On the up side it means that after work in town today we can put up drywall. Yes, I know we said we were not doing drywall. I know, we said we were going to do something more artistic. Something better. Well, we are doing drywall. The concern was that the space would feel too cabiny and ergo smaller if we did wood walls and concrete walls are just too much of a time commitment right now. So the drywall goes up today and hopefully we will be painting ( by we I mean my wife) by next week.

update October week one

So, we have been busy at work. Actually busy at work. We have not had the time to put toward the tiny timber house that we would have liked. The start of October has seen a slowing in the construction of the house. Though thanks to a friend for letting us borrow a floor stapler the wood flooring is almost done.

Yesterday we framed the shower walls. We help to do a concrete shower with a little help from of friends at Set in Stone. We are also almost ready to template out countertops. We plan to do the countertops in concrete as well, also with some help from Set in Stone. The bathroom wall, our only interior wall, is framed.

We bought a bathroom sink this week. This brings our secured amenity total to: bathroom sink, shower head, kitchen sink, propane cooktop, and propane hot water heater. We chose cast iron sinks for both of our sinks and the hot water heater is an outdoor model that we are retrofitting to supply the house. More on that concept to follow, when we install.

This week is Fall break at the school I work at. Meaning, we will have additional time to work on the house. Yesterday we framed a door on the second floor and that takes us one step closer to being fully dried in. By the end of this upcoming week we will be. We are then ready for our radiant barrier insulation. Check out the stuff we use at our friends blog: tiny revolution.

Yesterday was a big day. We framed a door, built piers for the front porch. Laid timbers level on the piers and nailed in deck joists. We also took care of framing the entire bathroom/ shower.

This is the update for now. I will try to get some photos soon.

tinyrevolution.us/http://tinyrevolution.us/2012/10/05/special-radiant-barrier-and-insulation-offer-from-ecofoil/

retro posting: raising the first rib

     I have been asked countless times, " how id you get the big beams up." Here is is the how we did the first one. I climbed a tree, Hung a climbing harness in the tree, and ran a rope through a pulley on the harness. We took said rope and connected it to a truck a few hundred feet away via several redirecting pulleys. We connected the other end to the first timber rib.
     We lifted the rib to an angle so it would not just pull flat along the ground. Once we tipped the rib we placed blocks behind it so it would not slide.
All set. Rope attached to truck, Truck in gear, pulling forward. As we moved the truck forward the pine bent lower and lower. I thought the plan had failed. I parked the truck where it was and when I went to examine the situation I discovered that the rib now felt like a 2x4. It was essentially spring loaded by the bent tree. Allowing the spring of the tree to do the work we simply positioned the rib where we wanted it and lifted the holding blocks out of the way. We nailed some angled boards to the rib to keep it from tipping and the first rib was in place.

   The other ribs actually had to be lifted eight inches at a time due to the angle being incompatible with our new found spring loaded tree. This slow raising of the other ribs was definitely an exercise in trust and cooperation. Building this house has been one of the best forms of marriage counseling. It has taken communication to a whole new level.

second floor update

 The second floor is almost done. We have to a few windows to install and the stud work to support said windows. The roof is coming along nicely. We have all of the roof trusses up as of this past weekend. The pictures hearer show all but two trusses up. The photos also show the house before the North wall was built. More photos are to come. I often get distracted with building and forget to stop and take photos of the progress. We are using metal roofing and a radiant barrier on the roof. We nailed wide purlins in place to stabilize the trusses before placing the radiant barrier down. Once the radiant insulation was in place we nailed purlins on top of our wide purlins. These top purlins will allow us to screw the metal down while still maintaining an air space between the radiant insulation and the metal roof. This air gap is important in order for the radiant barrier to work properly, according to my reading.
The main floor is wrapped in tyvek. The windows are in and it is starting to feel like a real house. My next post will have the first photos of inside.

square thoughtage

The average American household is now over 2000 square feet. The average American individual has around 1000 square feet of personal living space. These statistics vary slightly depending on the source but hold reasonably close regardless. As the modern family has morphed and shrunk the homes in which we sleep, spend weekends, holidays, and special events has expanded. The expansion is something to the tune of doubling within one lifetime. This is an extreme reality of modern American life, we own larger homes have smaller families. Paradoxical? I think yes. 

There is a movement, a currently chic and trendy movement, toward small homes. Homes that are minimalistic in size. Homes that are even tiny. This movement is rooted in diverse beginnings, as diverse as the owners of such homes. Some build a tiny home because they want to create something unique. They want something that they themselves crafted and a tiny home is no so daunting as a two story colonial. Others buy tiny homes as a way to avoid debt. The smaller home carries a smaller price tag and allows the owner a freedom from debt. A smaller home with the smaller price tag afford these individuals the ability to fill their small space with quality over quantity. Still others, own tiny homes because the life they live are conducive to a small home. We sleep at home but we live in our cars. We cook breakfast at home but we eat lunch and diner in town. We work all day and spend the evening in the shops. Despite the regional and cultural differences across the county we spend less time at home today than ever before. It is time our house design reflect our culture and not that of our parents, or the aristocracy of past centuries. 

We are building a tiny home for all of these reasons. A tiny home is not limited by size. It is designed to evolve. It should be fluid as our lives are fluid. Our house will be 400 square feet. We will have outdoor living areas; covered porch areas, garden paths, rows of fruit trees. The design accounts for future additions. We may enclose a section of porch, converting a screened room to an extra bedroom if the need arises. If the need moves out it can always be converted back to a screen roof. It is fluid. We are accounting for desires such as creative work space. This may enlarge our house but not without reason, for thought and consideration for design. A tiny house is about creative use of space, multi purposing, quality over quantity. A tiny house is about purpose and freedom. It is not limited by size but empowered by it. We have chosen to build a tiny house.

Second floor

       This past week has proved to be productive. Partly due to the threat of impending rain and partly because we made a conscious effort to build on multiple days. Unfortunately, I forgot to bring the camera for a daily snap shot. The photo to the left is our progress as of the end of the week.  The sub floor is done, save a small strip that will allow access to the crawl space. The second floor has half of the studs done. Yes, we are building the second floor with traditional framing as opposed to timber framing. Building the timber ribs was fun and interesting but there is no way we can safely raise ribs on a second floor. Not to mention we ran out of cured oak for the process. So, standard stud walls it is. We are using saw mill cut pine from the mill five miles away. 2x4x8s are 2.40 a board and that beats Lowes by a mile, not to mention it is locally sourced, cut and milled. Additionally, the wood from the mill is true cut as opposed to the "standard" lumber from the store that is labeled 2x4 but is really smaller.
      We were able to build a jig and finish half of our roof trusses this week. We lifted them into place with a reasonable amount of grunting and ladder climbing. The metal roofing and reflective bubble insulation was picked up this week and we will hopefully install it in the next couple days.
     Yesterday, amidst the rain, we burned four large piles of brush. Most of the brush was from clearing the site for the house. We also burned a large amount of brush from our recent clearing in the forest surrounding the house. The burning really helped to clean up the surrounding area and removing the downed brush from the forest will make room for our hazelnut planting this Fall.
    Below are several more pictures of the house in its current state, taken from different angles. The second to bottom photo is taken from the lower field and gives good perspective on how the house sits up on the hill.

site prep

       This is a retrospective photo. Here I am laying out the house site. We drover rebar into the ground at key points so as to allow us to visualize the size and shape of the house. This picture was taken mid July. We began foundation work shortly after this picture was taken.
      The house foundation now sits to about where I am kneeling. You can see the thick forrest in the background and the field to the South. We have since thinned the forest and trimmed the undergrowth to about seven foot. This Winter we will plant hazelnuts in the protection of that pine forest.
To the left you can see some of the foundation work in progress. We gathered mountain stone from near the house site and placed large rocks in a trench. Some of the rocks were excessively large , we laid these in the corners. in addition to the mountain rock we also took gravel from the old logging trail and filled the foundation with crushed stone in fill.
Following the rock and gravel we poured 4 inches of concrete base layer all around the perimeter. once this was set and cured we poured an additional cap of concrete over and around the first layer. The layering created a wide, firm and well established foundation on which we laid mortar and one corse of eight inch block.

Here is another shot of me working on the forms for the base layer of concrete. The photo shows the East side and the North side of the surrounding area. The East side drops off into the lower meadow and wetland and the North gives way to more dense woods. We cleared 3/4 of the East trees in order to create a healthy managed forest enviroment. We kept the maples, sassafras, a few interesting pine trees and sweet gums. The thinned forest will allow these trees to thrive and become stronger well established specimens. It also allows for more light in the house and a better view.

Final rib

The final rib is upright and secured to the others with 4x4 beams. The 4x4 beams will serve as floor supports. They are lag screwed into the main 6x6 beams and extend out of the house. The extension of these beams will allow for connection the ceiling rafters to the front porch. The interconnection of all beams in the house help with stability and structure of the design. 

Stepping back to look at the structure. It is so rewarding to see the house with the actual end walls in place. It gives a real sense of the size and shape of the house. Standing up on the second floor joices gives an idea of the view and how the house is built into the edge of the forest. 

Third Rib

The third rib is up, square and level. We have begun "mocking up" the future porch by laying a beam out to a pier. It is shaping up as planned and we will be ready for the second story soon. 

It is nice to see the lumber pile migrating into use as portions of the house. We are most of the way through the pile and will be in need of another run to the lumber mill soon. Considering the lumber mill is 4.8 miles away this should not be too much of a time suck. 

The sub floor is in in the bathroom as well as in part of the main house. We have left a access door into the crawl space so as to allow under house adventures and plumbing/ electric work as needed or when. It was nice to stand up on the future second floor and look down. It was also nice to catch a glimpse of what the view will be from the bedroom. 

The above photo shows our shameless use of lag bolts to hold the timber frame together. We did use angle bracing ( cherry in this case) to help keep the frame in square. While mortis and tenon would have been beautiful and is an honorable craft. It is not a craft I possess and so in the interest of stability the lag screws are countersunk into the frames, hidden but there. 

beginning: tiny timber house

Construction has begun on the timber framed tiny house. We have tucked the house onto a terrace in the woods and most all the supplies have been hand carried to the spot due to limited access via vehicles. We are using 6x6 oak beams. The photos to the left show the bathroom area up and framed. The footprint is 200 square foot. The total will be a 400 square foot house with kitchen and bathroom on the main level and laundry, bedroom, closet and sitting are upstairs.